Dummy engine placement

As mentioned in my last update, I needed to get the engine in place so that mounts could be fabricated and the remainder of the front chassis put in place.

A large section of the firewall and the transmission tunnel was removed and the engine and gearbox wrestled in to position. Whilst the final position still needs to be worked out, it does show roughly how it will sit and what room I have to work around it. From initial looks, the passenger side mount will be straight forward to fabricate but the drivers side will require a bit more work to get it strong without being too bulky.

  

This entry was posted in LA Lancer. Bookmark the permalink.